Clicking OK returns the same message, if I search for the file, find it and then browse to that folder, I still get the same message.

Any help will be greatly appreciated.

It seems like you may have a corrupt download.

Delete the old downloaded file and redo the download and install.

Is this your first version or did you install a older version before?

If you did, did you save the older version?

Hope you can help!

Thanks

FYI   Ran windows install cleanup and then it installed version 1.18.6.1 with no problem.

Thanks for the help!!

It's starting to seem like something else is causing the error if that old version is giving the same message.

I have saved older versions of the LSS and Diagnostic Utility!

On that topic and more:

How I create Labels Containing a Track List

I've put together some stuff I use to create CD Labels.

• I wrote up the procedure I use in a PDF File.
• I make PDF Files of any Documentation I create.
• I have V1.14.32.1 of the LSS and since Version 1.17.90.1 of both the LSS and the corresponding Diagnostic Utility.
• I include an "Additional Stuff" Folder which contains anything I create while developing My Custom Templates.
• I created ZIP Files for 6 Windows Vista "Right-Click" Commands I developed to support this and other procedures I use.
• I "ripped off" the "Template Playlist Beta" "Full" and "Half" Disk Templates; fixed them and create a ZIP File of the two templates.
• I have a PDF that contains "Template vs. Simple Labelers" - a comparison of what is the structure of each template.
• I found 5 FREE Tools I use for development, and have more I am testing.
• I have a PDF which contains a "Mini Resume" and a lot of "LightScribe Stuff" I've researched.
• I continually develop PDFs on the Tools I use for development.
• I developed 110 Custom Templates for the Template Labeler.
• I developed 5 collections of Images.
• I developed a New Custom Wedding Template for one Forum User and I did one for another Forum User.
• I fixed one LSL File for another User by changing a White Outline of some Text to Black.
• I created Previews of all my Custom Templates and Images and have Catalogues of both as PDF Files.
• I created 173 ICONS and a PDF Preview.
• I developed 4 Test "borders" for the Simple Labeler.
• I tend to concentrate on Filling the entire disk surface especially with TEXT, Bold, Outline, White Text, and More Font Control.
• I have all this and more in My MS Office Live Workspace and on My Windows Live Skydrive.
• I have just finished writing a Newsletter about what I've been doing and 2 other FREE Programs I've been researching.
• 109 Forum Users have taken my offer.

Send me a Private MESSAGE containing:

• Your correct E-mail Address (REQUIRED by the site to send links);
• Your full name (For my records); and
• A nickname you use (For my records).

I am retired on a disability, and I do this TOTALLY FREE.

I also try my best to keep E-mail Addresses confidential. I use "Blind Carbon Copies" when I send out anything.

I only occasionally send out Special Notifications, if I do something major.

The only "COST" is your E-mail Address which is REQUIRED both My MS Office Live Workspace and My Windows Live Skydrive to allow access to the stuff I've developed.

I just found out that:
If an Editor or Viewer forwards their E-mail "Invitation" to someone else, that person can use the link in the sharing "Invitation" to view a read-only version of my content.

Rev. 2009-07-20 13:00

I have searched the FAQs and found very little except the questions; no solutions. The diagnostic utility is of no use because it says you have to have the software installed in order to use it. Like another poster here, I have searched for that file and pointed the installer to it with the exact same results.

Lightscribe, what is the answer? By now, it should be readily available to all.

rayno3

PS: why can't I read all the messages? The last one below has the lower half of the letters cut off and I suspect he may have had more to say that is below the cut off portion. This is not the only page on this forum that has been this way.

You'll notice that the latest LightScribe ESD software [LS_Update_1.18.26.7_.exe] - fails to fully complete its install due to an error within their latest LightScribe system software update as this is an issue w/ either the software makers/venders or uploaders! So you can't use it & so either wait for a new LightScribe software update or just use an earlier LightScribe software version as follows:-

DOWNLOAD NOW  

In order to correctly install any previous LightScribe System Software which is an earlier LightScribe System Software version release rather than the current installed version:- the same still applies to upgrading to any new LightScribe System Software release version:-> please go to the "Control Panel" & "open up "Applications and features" & in there you'll need to select "Lightscribe System Software" so that this software can be fully removed & then proceed to un-install it! - After that you'll be able to fully install any previous/new LightScribe System Software as a clean install.

HP LightScribe Notice:-  

LightScribe was conceived by Hewlett-Packard engineer Daryl Anderson. Further details can be found at Wikipedia http://en.wikipedia.org/wiki/LightScribe regarding LightScribe which has now ended in May 2011 & includes details about a stable release v1.18.24.1 for computer's LighScribe Optical Drives, & as such would be classified as the software part of of a computer's LighScribe Optical Drives hardware! Although HP www.hp.com did & still possibly supply www.lightscribe.com with their lightscribe drivers for downloads - one can also get them from HP as well - but maybe some users would not know exactly where to go within HP's site as HP aren't very clear with regards to finding this old data & the LightScribe Optical Drive would be useless without the LightScribe System Software due to LightScribe which ended in May 2011!

"Beginning in May 2011, HP LightScribe® technology optical disc drives will be at the end of their production life in HP Desktop Workstations and Commercial Desktop PCs."

The above [LS_Update_1.18.24.1_.exe] software package which was obtained from out of a portion of my previous BD-R (LightScribe web-site) LightScribe System Software.mht complete web page together w/ ESD backup of an older LightScribe software version which I had done will fully install the LSS on any Windows 8 Enterprise/Professional (x64) RTM Build: 9200 operating system & I still do use - due to those [LS_Update_1.18.26.7_.exe] Windows 8 (x64) installation issues!